How To Open A Saab 93 Without A Key to Replace a Saab 9-3 Key

The Saab 9-3 is a fantastic car that is full of driver appeal. It has excellent visibility and a powerful performance engine. It has a high safety rating.

However, it is important to ensure that you have at the very least two keys working for your vehicle. If you lose only one key, it could be costly to purchase another one.

How to replace the ignition Key in a Saab9-3

If your car key won't start in the ignition and you want to replace it, you'll need to replace it. This guide will guide you through the steps to do it on a Saab 9-3. You'll need to replace the key, buy a new reprogrammable cell, and buy a brand new case for your key-fob.

Modern Saab models use transponders instead of a metal key to unlock the car and begin it. The issue with this is that the reprogrammable batteries in the key-fob will wear out and won't hold a charge for long. This is particularly when you use the same key for the lock you have.

The good news is that the battery can be replaced fairly easily by an experienced locksmith. You can also do it yourself if you have the necessary tools and a little bit of patience. The first step is to separate the key-fob. This is done by inserting a flathead screwdriver into the slot that is located in the middle of the case. It is important to work slowly, as the plastic is extremely thin and can be damaged easily.

After the case has been opened, you can make the new key by combining the lower part of the key from earlier with a transponder and banana. This will ensure that the new key is mated to the CIM correctly, which can make all the difference when replacing the primary key for your saab key programming near me 9-3.

How do you replace the ignition Key on the Saab 900

If you don't have two keys you'll need to remove the dashboard and steering wheel to get to the ignition. Start by disconnecting the negative battery cable. After the battery has been disconnected, it is possible to remove the trim and dashboard pieces that surround the steering wheel. Once the dash is removed, you can place a screwdriver in the opening behind the ignition switch.

The ignition cylinder comes with a key lock, which can stop the vehicle from starting if you don't have the key inside it. If the ignition switch of your 900 isn't working properly, check the key to determine whether it's in the lock or is stuck in the ignition barrel. It is also recommended to rotate your keys and keep them clean to prevent being bent.

Saab cars differ from other cars because they do not have traditional keys made of metal. Instead, the car recognizes the electric signals of the key fob through a chip that is specifically designed for it.

If you lose your only working key fob, the dealer will charge you top dollar to replace your computer module (known as the CIM). We can reprogram the EEPROM on your computer to allow it to accept new keys, without the need for replacement. This will save you over 50% of the price the dealer charges! This is the saab key replacement KEY PROGRAM. Find out more about it here!

How to Replace the Ignition Key on a Saab 9-5

The metal portion of a classic Saab key is easy to copy, and is not much of a deterrent against theft of vehicles. The real protection comes from the electronic part of the key-fob, which is equipped with a chip that detects the car when it's inserted into your ignition switch.

Saab has relied on the technology of this anti-theft system for more than 10 years. It's not as effective as a physical lock for your door, but it makes stealing your car much more difficult. Every saab key battery replacement owner needs to keep an extra Saab key in their vehicle.

The majority of new Saabs come with two keys at the factory. However, you can add more at an authorized dealer using a handheld computer called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 vehicles which have more modern, newer features that require keys-fobs.

The dealer will replace the CIM or TWICE module of those cars if the keys are lost, and cost you top dollar for this. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.

How to Replace the Ignition Key in a saab 9-3 key programming XC90

If your saab 93 key programming 9-3 key fob begins having trouble turning the lock barrel it could be time to replace it. It's a simple process and you don't have to visit a dealership. Instead you can do it yourself at home with a few simple tools.

First, you'll need to prepare the new key. Before you begin, turn off the anti-theft feature by placing blocks underneath your rear wheels and releasing your handbrake. Then, put the key in the ignition and turn it to the on position, which activates the accessories but doesn't start the engine. Repeat this five times, then keep the key in the on position.

Next, you'll need to get a replacement case for your old key fob. They are readily available at many auto parts stores and are usually inexpensive. You can get them with or without electronics, depending on the model.

To open up the case, insert an flathead screwdriver into the slot in the middle. Gently work it. The case will split easily and, once you've got it open, you'll get access to the internal electronics. To remove the electronics, employ a small screwdriver and try prying them out in a gentle manner.