Fiat 500 Key Fob Replacement

If your 500 key fob isn't working Try a different one to see if the car will recognize it. If it does, the issue is likely with the original fob's battery or water damage.

First, replace the battery. The "+" side should be facing downwards.

Dead Battery

The battery is usually the reason for the fob's inability to function. It's easy to fix Most fobs give you a warning if the battery is low. You can find the correct procedure on YouTube for nearly any key fob on your vehicle or in your owner's manual. You can also bring it to a local locksmith or the dealer that sold it to you to replace it.

Sometimes a fob stops working due to a fault with the internal circuit board. This isn't a lot of common however it can occur. The internal chip may be damaged in the event you drop the fob over something hard. It can be a problem if you have an aftermarket fob and the key doesn't work. In this case it is essential to go to a dealer or locksmith to get the key reprogrammed to make it compatible with your 500.

One 2012 fiat key fiat 500 duplicate key - click the next page, 500 flip key remote - resembles Ilco with lock, unlock, and trunk buttons – new keyless entry replacement (will need to cut & program by a locksmith).

Damaged Chip

A fiat punto key 500 key fob is a wireless device that provides the signal for the car to start when you press the button. It has a microchip containing details about the code required to connect with your car. If the chip is damaged, it won't transmit the correct code and the car won't start. A locksmith can fix this type damage. United Locksmith can complete this service on both classic as well as newer models, so do not hesitate to contact us.

A locksmith can program the new key fob. This is less expensive than visiting a dealer and will work just as well. You'll have to provide some details to the locksmith, like the year that your car was built and the model.

Rub the chip with an old dollar bill if you're not certain of what to do. The copper in the bill is abrasive and will get rid of dirt and oxidation. However, it will not cause harm to the microchip. If the chip is physically damaged, however, it may not be repairable. This can happen when you drop it or run it over by your vehicle.

Water Damage

Whether you accidentally dropped your keys in the pool, left them in your pocket while you were swimming at the beach or splashed them with water during a rainy day, it's likely that your fob will have some water damage. Even if you only have tiny amounts of water on the key, it can cause major problems for its electronic components.

It is usually possible to solve this issue yourself by taking the fob off and cleaning it using a paper towel. After the fob is dry you can replace the battery. It will then begin working normally.

You can also take your key fob to a local locksmith shop or auto shop to get it professionally cleaned and programmed. These professionals will use special equipment to make sure that the key fob functions with the computer in your car.

If your fiat key programming 500's main fob stops working, it can be frustrating and stressful. You might be tempted to go to the dealer replace your key fob, but this can be expensive and difficult to arrange. Locksmiths can replace your key fob without having to visit an establishment. Because of this, they are a far better choice than an auto dealer.

Pairing Issues

If you lose your key fob, or it stops working but there's nothing going on, it could be the chip that has gone off the rails. This could be due to water damage or a dead battery.

Most of the time, this can be done by following the instructions in your owner's manual. However it's recommended to hire an automotive locksmith take care of this if you're having problems or if the directions in the manual don't work for you. This will ensure that the chip won't be damaged and is the least expensive option.

Another issue that plagues some 500 owners is that the key fob doesn't lock the car. This can be a big issue if you're going to a gas station and want to fill up. Some owners have reported the locking mechanism of their 500's malfunctioning and requiring replacement of the entire steering intermediate shaft. This issue was reported in a technical service bulletin (TSB) by Fiat.

A reputable locksmith will assist you if your Fiat is experiencing issues. They can duplicate your key, or they can make you a new one that will lock and start the vehicle. They're able to accomplish this without having to see your old key and are usually much cheaper than getting it from a dealer.