Ghost Immobiliser Installation

Guard your precious possessions from car thieves by adding a ghost immobiliser. Our TASSA-certified system is safe from key cloning, hacking, and also vehicle immobiliser bypass.

The system is hidden in the wiring loom in your vehicle It is invisible to anyone who looks. It is operated by creating pin code push sequences through existing buttons on the steering wheel, door cards and centre console.

No circuit cuts

It's not a surprise that people want to protect the car they've worked so hard to buy. Traditional security systems, such as alarms or wheel locks, are easily manipulated by thieves. A ghost immobiliser on the other hand is a very effective solution that works silently and cannot be identified by modern thieves.

Ghost immobilisers is also known as a hidden device, is a device that communicates to your vehicle's data network CAN to shut off the engine. It does this without the use of key fobs or radio frequencies. It communicates with the ECU of your vehicle by using buttons on the dash, steering wheel and door panels. This generates a unique pincode that is only known by you. The code can be altered at any time and can have up to 20 digits depending on your preferences. It also includes a secure emergency code that you can use in case you forget your PIN.

The ghost immobiliser can also be helpful to prevent the relay box inside your home from transmitting the signal from your car key, which will open the doors and start your vehicle. It could even block high-tech methods of stealing your car such as OBD port hacking. The device is small and weatherproof, so it's difficult to detect and is even more difficult to interfere with.

Another advantage of the ghost immobiliser is that it can be put in your car without any permanent marks. It is ideal for those who are planning to sell their car in the near future. It's also a lot more efficient and less time-consuming to install than the factory-installed system.

The autowatch ghost installers midlands Ghost, a revolutionary new-generation device, prevents thefts from cars that are not connected to a vehicle's CAN network and using the existing buttons to generate a unique PIN code. This is a snoopy device that can be installed without wires being cut and does not require any additional key fobs. It can also be connected to the original ECU of the vehicle, preventing thieves bypassing it with a new key. This system is TASSA certified and can be connected to an International Security Register, allowing owners peace of mind knowing that their vehicles are protected against theft.

No scanning with RF

You'll want to safeguard your vehicle from theft if have spent an enormous amount of money and effort to customize it. One method to accomplish this is to install an immobiliser. This will prevent the engine from starting until you enter a unique PIN. Using the buttons on your steering wheel and dashboard, you can generate a PIN up to 20 digits in length that is only known by you, and ensure that only you are able to drive your vehicle. It is also possible to set up a service or valet mode that will allow you to start your car temporarily without entering the PIN. This allows your technician to work on your car without you being present. This is a great feature for those looking to reduce time and make their lives easier.

audi rs4 ghost installer immobilisers are next-generation device that connects to the vehicle's CAN data network and utilizes the buttons on the steering wheel and dashboard to programme a personalised PIN code. It is designed to blend in with the rest of your vehicle, since it doesn't emit any sound or LED indicator. It can be placed anywhere on your vehicle, without impacting the appearance of your vehicle.

This stealthy device is approved by TASSA and could lower your insurance costs. It has a tracking feature that can locate your vehicle, even if it's stolen. This is particularly useful if have a rare or expensive vehicle that you've invested lots of time making it your own.

Autowatch Ghost, in conjunction with the iPhone application allows you to remotely start your car if you have forgotten your PIN code or are not able to enter your vehicle. This feature is great for those who need to run errands or pick up your kids, but do not want to let someone else drive your car. It's also useful if you need to take your vehicle to a mechanic for maintenance or repair.

The ghost alarm installation near me (Source) has the advantage that it doesn't transmit or detect radio frequencies, so it is undetectable by thieves who employ RF scanning and code grabbing techniques. It can also protect your car from key cloning and ECU swapping, which are typical methods of theft from cars.

There is no key to cloning

Ghost immobilisers can be a great way to protect expensive cars and stop key copying. They stop your car from being started unless a PIN code is entered along with the standard key fob. This makes it extremely difficult for thieves to rob your vehicle and can also deter them from doing it in the first place. This is an especially good idea if you have invested a lot of time and money personalising your vehicle or own a unique or expensive model.

The immobilisers are connected to the vehicle's CAN network and are completely hidden meaning their presence isn't visible. The device is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a burglar would need to wait longer to take your vehicle.

To get around the system, a thief must be aware of the unique pin code and the location of the Ghost. The pin code will be specific to you and can be altered as many times as you'd like. The pin you select is easy to remember but mathematically difficult for anyone else to figure out. Additionally the engineer will provide you with an emergency pin code override in case you ever forget the pin.

The Ghost CAN bus immobiliser is weatherproof and easily installed in any area of your vehicle. It is compatible with any vehicle and can be fully customizable to match your car's look. It is also very easy to use and cost-effective. The device can be transferred to another vehicle, provided that it is compatible with the new vehicle.

The CAN bus can be used with other security features. For instance, it can detect the damage to your vehicle and notify the owner. It could also shut down the engine in the event that the vehicle is being manipulated. The system also protects your vehicle from key cloning and hacking. It can also detect vibrations or contact with the vehicle. Additionally, it will alert the owner if the vehicle has been moved.

No OBD port hacking

Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This prevents a thief hacking in to disable your alarm, turn off your key fob and code new keys. This technology is a major improvement over the methods used by thieves in the past to steal your vehicle. The CAN data network also means that the system won't be affected by disconnecting or changing the battery.

The autowatch ghost installers near meghost immobiliser installers near me, the first non-detectable immobiliser for CAN bus worldwide, safeguards against key-cloning, hacking, and replica car theft. It does not use LED indicators or key fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN code sequence (up to 20 button presses) that needs to be entered prior to when you can drive your car away.

Modern thieves employ diagnostics to identify circuit cuts in your vehicle. They are able to bypass immobilisers that require lots of wiring or are incorporated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not able to be identified by diagnostic tools that are professional. It can be put in on vehicles with anti-theft devices.

Another advantage of the Ghost immobiliser is that your vehicle is only able to be started by a person who knows the PIN code and has physical access to your vehicle. This is a major advantage over security systems that can be bypassed by simple screwdrivers or cable tampering.

You can easily reset your PIN in case you forget it by using the emergency PIN override feature of a computer or mobile phone. This is useful if want to start your vehicle after having left it in a garage or with the valet parking service.

The Autowatch Ghost 2 is the most recent version of the product, and is approved for insurance by TASSA when installed by one of our authorized installers. It comes with an RFID fingerprint system that allows individual components to be identified, which will allow the return of stolen parts should they be discovered, and can also be switched into 'service mode' which allows the engine to start when the vehicle is in a garage or with valet parking services, but you will need to enter your PIN code to get out of the car.