double glaze repair near me Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism become faulty? Perhaps the window or door handles aren't able to connect properly or are difficult to use.

It is crucial that your double-glazed doors work smoothly, otherwise you'll lose energy and increase the chances of burglary. Owen the Locksmith can repair your door lock for an affordable price.

Snapped Key

It can be a hassle when a key gets stuck into the lock. This can also be a security risk, as it may leave you vulnerable to an intruder if the door does not lock. Fortunately, there are some quick fixes that you can attempt to fix the problem and get your door functioning properly again.

Be calm. If you panic and begin poking around wildly you may end up pushing the damaged piece of the key deeper into the lock, thereby making the situation even more difficult.

Then, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slide out more easily. You can also make use of a screwdriver to break up any stuck pieces that could be blocking the way. If you have a chunk of the key that's stuck then grab it using the help of a paperclip or any other thin metal object and pull it. Both methods work well, but be careful not to push the broken piece of the key further into the keyway.

Some paperclips have grooved edges that can work in a pinch as hook extractors and some Jigsaw blades can also be used for this use. If you do not have any of these handy, you can make use of needle-nose pliers to bend and create a hook. Finally, a pair of tweezers can be used to grip and pull out the remaining piece of the key that was broken.

If you are unable to remove the broken key piece then you can use a lock deicer. It's available in many hardware stores and is used to freeze any moisture that may be present in the lock.

If none of these solutions seem to work, it might be time to consult a locksmith. The experts at Fitlocks can quickly fix problems such as broken handles and snapped keys with uPVC locks and door mechanisms. They can also reconfigure double glazed windows repair glazing door mechanisms so that they are more easy to use. You can request an appointment online for a double glaze repair-glazing repair or call us to discuss your needs.

Broken Cylinder

A damaged cylinder poses a serious security threat. It's fortunately a simple repair double glazing for professional locksmiths to complete. To fix the cylinder a locksmith will need to tap it. This can be accomplished with the hammer or other tool. However, the most effective method is to use a wire or a long match. Place the match or wire's end in the keyway. The locksmith can then strike the lock in order to break it. This is much safer than using a heavy hammer that can cause damage to the lock.

Overheating is the primary cause of cylinder heads cracking. This can happen when the block and the cylinder head are made from different metals such as cast-iron and aluminum. When different metals heat up and cool down at different rates, it may cause localised hotspots that expand faster than the rest of the head of the cylinder, leading to cracks.

Corrosion is another possible reason for fractures in cylinders. If the cylinder head and the block of the cylinder are not properly maintained, this can lead to rusting or corrosion and cause them to expand at a higher rate than they ought to. As time passes, this may also cause cracks.

If your uPVC window lock or door is stiff or requires a lot of pressure to turn, this can be caused by many things. A malfunctioning locking mechanism, misalignment, or an old handle are the most common reasons for this issue.

Fortunately it is a simple and cost-effective fix for the majority of homeowners of double glazing. A professional locksmith is able to solve the issue within one hour of arriving at your property. Depending on the needs of your home, they can replace the locking mechanism, replace the window handles, and also change the gearboxes. A professional locksmith will be able to inform you of the most cost-effective option for your home. They can also suggest upgrades to the highest-security 3 Star euro cylinders TS007 that add an extra layer of protection against burglars. It's a small amount to pay for the peace-of-mind that comes from knowing that your uPVC door is secured.

Broken Handle

It's not surprising that window handle locks can break. They have complex mechanisms which deteriorate over time. If yours is damaged, it can be difficult to pinpoint the cause of the issue and make sure you fix it properly.

The issue could be related to the locking mechanism inside or the latch, fixing your broken handle will increase your uPVC double glazing door's security and allow you to stop drafts. It is costly to repair or replace the handle in a way that isn't done correctly. It could also harm the frame and lock of your door.

With the window open and the window open, loosen the screw holding the handle using a screwdriver. This should be located on the inside of the back plate, which is usually covered by an aesthetically pleasing cover for the screw reasons. Be careful not to damage any of the internal components within the handle, such as the levers or plates on either side of the spindle. Ideally, keep them in the same place so you can replace them again in the event of a need.

Then, with an additional screwdriver loosen the screw that holds the handle to the spindle at the back. Once the screw is removed, you should be in a position to pull the handle away and pull out the broken spindle. Replace it with a brand new one, making sure it is the same length as the previous one (you will typically find them on the internet or in hardware stores) and screw it securely in place. Do not overtighten the screw as this can harm the handle as well as the window frame.

Close the handle and try it. It is likely that it will operate smoothly and you'll be able open your window again.

Don't forget to double-check that your uPVC window is shut correctly when you're working with the handle. If they don't close properly, you could experience draughts or damp in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of your window frames to ensure they close correctly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is especially frequent in uPVC tilt and turn windows. These kinds of windows require a handle which operates a locking mechanism in the window frame. The handle is attached to a rod in the centre that triggers a set of cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism is not able to open when the handle is turned it is likely that the spindle has broken and this could be a frustrating problem.

There are ways to fix this problem. A reputable locksmith can quickly and efficiently repair this problem. They will be able to remove the window handle using a tool to remove the wheel part of the mechanism, where the spindle is. This is done without causing any damage to the handle or causing other damage to the window frame.

After removing the wheel the technician can examine the spindle and identify the cause of the break. This involves disassembling the spindle and examining each component part, noting any wear or damage. This procedure is typically carried out by technicians working in a clean and safe environment.

Next, clean the damaged spindle. This will remove any dirt or other debris that could be hindering it from operating normally. The spindle may be replaced or repaired. If the technician is replacing the spindle it is possible to use a dowel that is the same size to the original. Then, he will drill holes that are identical to both pieces. This will ensure that the new spindle has a precise fit with the handle.

If the spindle is damaged and cannot be repaired, it could need to be replaced entirely. Home centres sell generic substitutes however if your window design is unique you'll need to contact a cabinet maker or woodworker who can make the exact part. Once the new spindle is in place it can be attached to the handle by lining up the screw holes in the handle with the frame's existing screws. Once the handle is securely in place, you can use your uPVC windows.