Window Repairs

Window repairs can help homeowners save money while maintaining their comfort. Window replacements may be required in the event of serious damage such as broken glass, or a broken window frame.

Many other problems are fixable to extend the longevity of windows. The most frequent issues are:

Cracked or Broken Panes

Whether it's an errant rock that was tossed by your lawnmowers or a tree branch that has been blown by strong winds, 257634.Xyz cracked window glass isn't just visually unappealing, but also can result in higher electricity bills as the broken pieces allow cold air into your home. Fortunately, it's generally easy to fix windows with broken panes.

Start by carefully removing the glass using gloves and glasses. You may need to use a utility knife to remove any remaining putty or glazing compound around the edges of the frame. Then, use a gentle cloth or paper towel to clean the surface of the glass and the wood of the frame.

Once the area is clean and dry, apply a waterproof silicone caulking to the frame's perimeter. This will stop water from getting into the frame through the cracks and cause further damage.

A crack that is severe in double-paned glass may cause gas to leak between the panes, making your windows less insulative. If the crack is significant enough to threaten the integrity of the glass, or in the case of an inner pane that's completely missing, it's time to call in an expert.

Thermal stress cracks can also occur when there's an extreme difference in temperature between the inside and outside of your home, causing the glass to expand or contract. If this happens across two parts of a window, it's probably best to replace the window rather than trying to repair it.

For cracked windows that aren't yet ready to be replaced clear tape can do a good job of stabilizing the crack and preventing the entry of bugs and cold air. You can even cut a piece of nylon stocking or tarp large enough to cover the crack, 257634.xyz and www.257634.Xyz - 257634.xyz - fix it with duct tape. This is not a permanent solution, but it's a good way to keep cold air out and insects away from your home. If your windows are older and you're starting to notice cracks in the glass, it's a good idea to check with your local window manufacturer regarding whether replacing the entire window would be the best solution for you.

Rotten Wood

Wood rot is one of the most common problems with windows. It can damage a home's appearance and pose a safety hazard. It is possible to fix the wood that has rotted. First, you need to ensure that the root of the rot has been dealt with. Examine for leaks in the roof and other places where water could get into the wood.

The next step is to remove any rotten areas of the window frame. This can be done using either a chisel, a rasp or claw hammer. After the areas that are rotten have been removed it is time to replace them with new wood. Pre-treated wood is recommended for this project, as it is resistant to the onset of rot. If you are unable to replace the timber that has rotted then you can use wood filler and hardener to strengthen the damaged area. Many hardware stores will carry this type of product. Follow the directions on the label of the product to achieve the best results.

After you have repaired the damaged areas of the window sill, it is crucial to protect the area. Apply a water-resistant sealant to the wood. Sikkens for instance is a great one to apply.

Use a two-part epoxy in order to safeguard the wood from further damage. It is simple to apply and gives a good finish. However, it's important that you adhere to the instructions for application on the label. When the epoxy filler is dry, you can sand down the wood's surface. Start with a rough sandpaper then move to more smoother grades.

The last thing you would like to do is make the rotted area even worse by expose it to more water. It is recommended, so, to cover the repaired surface with an oil-based primer that will protect it from moisture. Then, you can reapply waterproof wood sealant.

It won't open

There are many reasons why a window won't open. The house might have shifted or the wooden frames may have warped in humid weather. There is also the possibility that someone put them in place to protect themselves. However, with a bit of patience and the right tools, many windows that are stuck can be opened.

One of the most frequent causes of a window that isn't opening is the accumulation of debris or gunk on its moving parts. Dirt and grime build up on sliding tracks, hinges and locks over time, says Acme Glass. Metal hardware can also rust when it comes into contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease can prevent the oxidation process and ensure that your window is working properly.

The pulleys that raise or lower the window may become loose, or even break. These components can lose tension and become obstructed when they are placed higher than two floors higher than the ground.

If you are having trouble opening a window, 257634.xyz try using a pry bar to gently push the window to open a bit at one time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try applying a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.

Another issue with windows that won't open is a faulty spring that keeps the window jamb from lowering or rising. Depending on who manufactured your windows, you'll have to consult the manual of your owner for additional instructions.

If you've tried cleaning and lubricating the moving components on your windows, but they still won’t open, then it's probably time to replace the windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows in your home go from functional to unusable. A window that isn’t properly shut could expose your home to burglary and water damages. Contact us for more information about our windows replacement services and products today!