How to Replace a Saab 9-3 Key

The Saab 9-3 has a great variety of appeal to drivers. It offers good visibility and an efficient engine. It also has an excellent safety rating.

It is crucial to have two keys that work for your vehicle. It can be costly to replace a key if you lose it.

How to Replace the Ignition Key on a saab milton keynes 9-3

If your car's key doesn't engage in the ignition, you need to replace it. This guide will show how to replace the ignition key on the saab 9 3 key replacement 9-3. You will have to replace the key, get an updated reprogrammable phone, and purchase a new case for your key-fob.

Modern Saab models use a transponder instead of a key made of metal to unlock the car and start it. The reprogrammable batteries inside the key-fob will eventually get worn out, and eventually will not be able to hold charge. This is particularly true if you keep using the same key in the same lock.

The good news is that the battery can be replaced easily by an experienced locksmith. You can also do it yourself if have the proper tools and a bit of patience. The first step is to separate the key-fob. Insert a flathead into the slot that is in the middle of your case. The plastic is thin and it is susceptible to being damaged.

When the case is opened and you are able to prepare the new key by combining the lower section of the old key with the transponder and banana on the new key. This will ensure that the new key is linked to the CIM properly, which can make a huge difference when replacing the original key for your Saab 9-3.

How to Replace the Ignition Key in a Saab 900

If you do not have two keys, you'll have to take off the dashboard and steering wheel to gain access to the ignition. Start by disconnecting the negative battery cable. Once the battery is disconnected, you can remove all the trim pieces and dashboard pieces that surround the steering wheel. Once the dashboard is removed, you can place screws into the hole behind the ignition switch.

The ignition cylinder is equipped with a key lock which can prevent the vehicle from starting if you don't have the key inside it. If the ignition switch on your 900 isn't working properly, check whether the key is within the lock or is stuck in the barrel of ignition. It is also recommended to rotate your keys and keep them clean to prevent being bent.

Saab cars differ from other cars in that they don't have traditional keys made of metal. Instead, the car recognizes the electric signals of the key fob through a chip that is specifically designed for it.

If you have lost your only working key fob, the dealer will charge the highest dollar to replace the computer module (known as the CIM). However, we can reprogram your existing computer's EEPROM to prepare it to accept new keys without replacing it. You'll save 50% off the dealer's price! This is the saab replacement key programming KEY PROGRAM. Find out more about it here!

How to Replace the Ignition Key on a Saab 9-5

The metal component of a traditional Saab key is easy to copy, and it's also not a major obstacle against vehicle theft. The electronic part of the key fob has a chip that recognizes the car when the key is placed in the ignition switch.

Saab's anti-theft system has relied on this technology for over a decade. It's not as good as an actual lock on the door but it makes the process of stealing your vehicle harder. Every Saab owner needs to keep an extra saab key fob key in their car.

The majority of new Saabs come with two keys. However, they are also available for purchase at the dealer's expense using a handheld device, called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is for NG 9-3 cars, which are equipped with newer, more modern features that require a different key-fob and work through a different process.

The dealer will replace the CIM or TWICE module in these cars if keys are lost, and charge you top dollar for doing it. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.

How to replace the ignition Key in an XC90 Saab

It's possible to replace your saab key (visit the following site) fob if you are experiencing difficulty turning the barrel of your lock. The process is fairly simple and you don't even need to visit a dealer. Instead you can do it yourself at home, using just a few simple tools.

First, you'll need prepare the new key. Before you begin, disable the anti-theft system by placing blocks underneath your rear wheels and engaging your handbrake. After that, insert the key into the ignition and switch it to the on position that activates the accessories, but doesn't start the engine. Repeat this procedure five times and leave the key in the on position.

You'll then need to purchase a new case for your key fob. You can find these at any auto parts store and they're usually quite affordable. You can buy them with or without electronics, depending on the model.

To open the case you need to gently push the screwdriver with a flathead into the slot in the middle. The case should split easily and, once you have it, you'll be able to gain access to the internal electronics. To remove the electronics use a small screwdriver and try prying them out gently.