How to Replace a Saab 9-3 Key

The Saab 9-3 is a fantastic car that has a lot of appeal for drivers. It is a powerful engine with excellent visibility. It has a very high safety rating.

However, it is crucial to ensure that you have two keys that work for your vehicle. It could be costly to replace a key in the event that you lose it.

How to replace the ignition Key on the Saab 9-3

If the car key won't engage in the ignition it is time to replace it. This guide will guide you through how to do it on a saab spare key 9-3. You'll need to replace the key, get a new reprogrammable cell, and buy a brand new case for your key-fob.

Most modern Saab models utilize transponders instead of a traditional key to unlock the car and start it. The rechargeable batteries contained in the key-fob inevitably become worn out and aren't able to hold any charge. This is particularly when you use the same key for the lock you have.

The good thing is that the battery is easily replaced by a professional locksmith. If you have the proper tools and patience you can do it yourself. The first step is to remove the key-fob. Insert a flathead into the slot that is in the middle of your case. You must be careful, as the plastic is thin and can easily be damaged.

After the case has been opened then you can prepare the new key by combining the lower section of the key that was used previously with the banana and transponder on the new key. This will ensure that the new key is properly mated to your CIM and can make a significant difference when replacing the sole key for your Saab 9-3.

How do I replace the ignition Key in a Saab 900

If you do not have two keys, you'll need to remove the dashboard and steering wheel in order to access the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, you are able to remove the dashboard and trim pieces that surround the steering wheel. After the dashboard is removed, you can put a screwdriver through the opening behind the ignition switch and remove it.

The ignition cylinder is equipped with a key lock that can stop the car from starting if a key isn't present in the. If the ignition switch on your 900 isn't functioning properly, you should check if the key is in the lock or snared inside the barrel. It's also recommended to rotate your keys on a regular basis and keep them clean so that one doesn't become bent.

Saab cars differ from other cars because they don't use traditional keys made of metal. Instead, the car detects the electronic signals from the key fob by a specific chip inside it.

If you lose only one working key fob, your dealer will charge you a premium to replace your computer module (also called the CIM). We can reprogram the EEPROM of your computer to make it accept new keys without the need for replacement saab key. You'll save up to 50% on the price charged by the dealer! We call it the SAAB Key PROGRAM. Learn more about it here!

How to Replace the Ignition Key on a Saab 9-5

The metal portion of the classic Saab keys is simple to duplicate and doesn't present a major threat to theft of vehicles. The electronic component of the key-fob has a chip that can recognize the car when the key is inserted in the ignition switch.

Saab has relied on the technology of this anti-theft device for more than a decade. It's not as efficient as a physical door lock however it makes stealing your car a lot more difficult. Every saab centre milton keynes owner needs to keep an extra Saab key in their vehicle.

The majority of new Saabs come with two keys, but they are also available for purchase at a dealer using a special handheld device called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is for NG 9-3 cars, which are equipped with newer, more modern features that require a separate key-fob, and work through a different process.

If you lose all keys in the event of a loss, the dealer will replace your CIM or TWICE modules and charge you an additional fee for it. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.

How do I replace the ignition Key in the Saab XC90

If your SAAB 9-3 key fob is having trouble turning the lock barrel it's possible that it's time to replace it. The process is simple and you don't need to visit a dealer. Instead, you can do it yourself at home by using some basic tools.

First, you'll need to prepare the new keys. Before you begin, turn off the anti-theft feature by placing blocks underneath the rear wheels and activating your handbrake. Next, insert the key into the ignition and turn it to the ON position, which activates the accessories, but does not start the engine. Repeat this 5 times, and then keep the key in the "on" position.

You'll then have to buy an additional case for your key fob. You can get these at any auto parts store and they're typically quite affordable. You can buy them without electronics depending on the model.

To open up the case, put an flathead screwdriver into the slot that is in the middle and slowly work it. The case should split easily, and once you've done that, you'll have access to the internal electronics. To take the electronics out, employ a small screwdriver and try to pry them out with a gentle force.