how to reprogram a subaru key fob to Replace a subaru legacy key replacement Key Fob

Subaru Foresters, Outbacks, and Crosstreks are equipped with a smart feature that allows you to lock your car and leave it safe. This nifty feature lets you lock your car and leave it somewhere safe.

It is possible to purchase an alternative Subaru key fob from hardware stores or online. But, it is recommended to visit the service center of a subaru key replacement near me dealership to get an even more personalized experience.

How to Replace Your Subaru Key Fob

If you've lost your key fob, or you simply need to replace its battery, a few steps can help. Make sure you have a screwdriver and a replacement battery ready (ideally CR2032 3-V). The key fob may also require a spudger tool in order to separate the case from the circuit board. Before you attempt replacing it, be sure to check your owner's manual to ensure that you are using the appropriate battery for your vehicle.

Next, press the small silver button on the back of your Subaru key fob to let go and pull out a steel key. Insert the tip of your screwdriver into this slot to create the gap between the front and back of the key fob's body, giving access to its internal components. Remove the metal key and use a screwdriver for separating one of the housings that accommodates the control module which houses the battery.

Find the flat, round battery after the housing is removed. The battery should be visible because it is held in place by tiny tabs. Let the battery go from its tiny tabs and replace it with your new one, ensuring that the number is facing up. Then, reassemble the key fob and test it to ensure that it works correctly. In most cases, your car will chime and the locks should engage when you press the lock button on your key fob.

Why go to a Dealership for a Key Fob Replacement?

subaru lost keys key fobs are an easy method of locking and starting your vehicle remotely. Like all electronic devices, key fobs can break or become outdated. Fortunately, there are several alternatives for replacing your Subaru key fob in Bartow and Lake Wales.

First, you must determine the type of fob you have. Older models with an actual key inside are more of a teardrop shape, whereas newer models feature a large rectangle. Then, open the casing to expose the transmitter circuit board and battery. Remove the old battery and replace it with a new one. Use the correct polarity, and place your battery correctly or else your car will not start.

Typically, dealerships have the most extensive software for your vehicle model. They also offer a more secure alternative. However, they usually have higher overhead costs and may cost more than a traditional hardware store or locksmith.

You could also find the replacement at an auto parts shop, or online. If you choose this route, beware that Consumer Reports has found some off-brand fobs don't work properly with the car's system. Additionally, a lot of online stores that sell replacement remotes require proof of ownership before they can program the new fob for you. You can ask your local dealer or mechanic to do it for you. However, this may cost more.

Why Go to a Hardware Store for a Key Fob Replacement?

The key fob is a handy device that allows you to unlock your vehicle and get it started without the need for a physical key. subaru replacement key fob's fobs are loaded with features that make driving a car more enjoyable and easier. They can lock and unlock the doors while also allowing you to start and unlock the engine, unlock and open the gas cap and also turn on the light.

The majority of newer cars come with a fob that must be programmed prior to you can use it. These devices are given unique codes by the manufacturer that only locksmiths and dealerships can access.

When you lose or damage your key fob, the best solution is to visit a dealer. They have the tools and software to reprogram a blank fob so that it can work with your particular model. They can cut new keys and insert it into the fob for you.

If you want to try and save money, a few online sellers sell blank key fobs that they are able to program for you. These key fobs aren't as reliable as ones that are sourced directly from the dealership however.

You can find the 8-digit number on the door sill for the driver. Once you've written down the first digit, enter your vehicle and hit the lock button repeatedly as it takes to match the number. Continue to do this for the remaining number. After entering the last number, take out the ignition key and listen for a chime to indicate that the system has been properly programmed.

Why Should You Visit a Subaru Dealership for a Key Fob Replacement?

While a simple key that is attached to an open key cylinder mounted on the car fender is still the norm, many motorists now choose to use an electronic key fob that can lock, unlock and in some cases starts their vehicles. These fobs work by sending an electronic signal to the vehicle via multiple antennae. Then, it utilizes a transponder chip to confirm that the driver is a valid user. This is why most newer models require drivers visit a dealership to have their fobs replaced, as per Consumer Reports.

While this may seem like an issue, it's better idea to go through the dealer to make sure that you get a genuine replacement key fob and to ensure that your vehicle is programmed correctly for the key fob. You can also usually have the cost of a replacement or duplicate fob covered under your vehicle's warranty, which will save you money in the long run.

Before attempting to replace your Subaru key fob battery, examine the fob to find a small gap in the seam between the back and front of the fob (instructions to open the fob can be found in the owner's manual). If you spot this area, pop the fob open by using the flat-head screwdriver. Then, remove the battery that was in place and replace it with the 2025 battery in its place. Finally, put the fob pieces back together.